|
Shocks
Dec 8, 2021 19:50:47 GMT -5
Post by jims442 on Dec 8, 2021 19:50:47 GMT -5
Has anyone put coil over shocks on the rear,I'm looking to install them,but I don't want the rear to sag.If you have some info on them I would like to here.I have 14 inch rims with BF 60 TA's on the rear and measure 23 inches to lip of rear fender would like to keep it around there. I have air shocks now they leak a little so I want to change, so let me know what you have
|
|
|
Shocks
Dec 8, 2021 20:03:26 GMT -5
Post by bassinguy on Dec 8, 2021 20:03:26 GMT -5
Jim I put QA1 adjustable coil overs on my 65 Cutlass on all 4 corners. The car used to lean to the drivers side a little and I was able to take care of that. I also had air shocks on back, but the coil overs give it a better ride . I also install the (QA1) front sway bar, and made the handleing much better. With an adjustable coil over, you can set ride height and rebound rate. Been on the car for 6 months and really like them. A little pricey ,but did what I wanted for ride height and suspension. I am running a 17x7 on front and 17x8 on rear. Bassinguy
|
|
|
Shocks
Dec 9, 2021 8:23:29 GMT -5
Post by jims442 on Dec 9, 2021 8:23:29 GMT -5
Thanks for the input will look into those, where do I find them
|
|
|
Shocks
Dec 9, 2021 13:53:37 GMT -5
Post by bassinguy on Dec 9, 2021 13:53:37 GMT -5
You can buy them direct from QA1. I went through Summit Racing.QA1 will try to sell them in a suspension package,however I pieced the parts separately and got them from Summit Racing at a lower price than the kit from QA1
|
|
|
Shocks
Dec 9, 2021 21:17:09 GMT -5
Post by jims442 on Dec 9, 2021 21:17:09 GMT -5
thanks
|
|