|
Post by fromthegrave65 on Mar 3, 2018 10:40:37 GMT -5
Hey, upgrading to a dual master. The single pot had an adjustable push rod and 2 shims between firewall and master. The rod was held in with a cupped thick washer and a c-clip. New master has a non adjustable push rod and I just realized I needed the later model retainer cup for the rod.
My question, is there a standard measurement for the rod to know if I need both or any shims? Or should I use the adjustable rod with the cup retainer?
The assembly manual has a pic of the shim and says add (illegible). Only one though.
Btw dual master, manual 4 wheel drum.
|
|