|
Post by oldsproject on Jan 25, 2015 14:26:18 GMT -5
Finally broke down and installed a 200-4R in the cutlass. I relocated the tranny brace back on the frame to accomodate the new position. Curious how you guys solved for the change in ebrake location? Any help would be greatly appreciated.
|
|
|
Post by oldstata on Jan 25, 2015 21:11:20 GMT -5
Not sure if this is correct , but from my understanding the 200r4 is set up just like the th400. In the th400 the e brake you use the 67 e brake cables
|
|
|
Post by joepadavano on Jan 26, 2015 10:57:29 GMT -5
Not sure if this is correct , but from my understanding the 200r4 is set up just like the th400. In the th400 the e brake you use the 67 e brake cables That is exactly correct. Get the front and intermediate ebrake cables for a 1967 Cutlass with TH400. RockAuto has them listed.
|
|
|
Post by oldsproject on Jan 28, 2015 22:14:06 GMT -5
Thanks guys!
|
|