Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 12, 2009 10:16:23 GMT -5
I got the body bushing kit from Fusick and am wondering fi everyone is using the bolted bushings on the two spots that originally have the boltless pucks(under the front seats and up by the shock towers)? Also, the embedded nuts at the shock tower location are for 3/8" not the 7/16" bolts that the rest are? And the ones under the front seats, the hole is smaller in the frame so a guy has to trim the bushing to get it to sit down into the frame. Some of this seems a little random for "factory" parts.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 13, 2009 16:57:26 GMT -5
As far as the Pucks go, I had the same issue from Fusick. When I got the bushings from them, I new they were different, so, I called them up. They told me that they don't have a supplier for the exact ones olds used and that these were from a Pontiac supplier. I sent mine back and bought mine from Super cars Unlimited. They had the correct ones. I have a 66, but the pucks or plugs are the same on mine.
|
|