Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 5, 2013 15:02:50 GMT -5
Looking to see if there`s any interest. Seats aren`t a very desirable covering, but are absolutely soft and subtle. Extremely comfortable, frames and adjustment mechanisms are excellent condition, NO odor ! These could be shampooed and make great driver seats. (or re-cover) Drivers bucket, outboard side, under the back rest, is a hole in fabric (as pictured) Console is excellent PLUS, driver quality. All lights work, tac works. I found a set of keys in the car when I removed these items, now I can`t find them, console lock worked. I`ll try looking again. I didn`t have any tools with me when I took this stuff out, the auto floor shifter was there, both ears were broken off but the roller was on the shifter and it worked. I can go back after it if interested. I`ll leave this stuff on the site for a few days, if no interest I`ll pull it down. Don`t forget fastenal for shipping this bigger stuff
|
|
|
Post by jims442 on Jan 5, 2013 16:26:35 GMT -5
how much for console
|
|
|
Post by keener on Jan 5, 2013 18:26:22 GMT -5
How much for the seat, front and back. Would you sell only the front? How much? Also, are these from a '64 club coupe? I could use the door panels.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 6, 2013 9:14:40 GMT -5
P.M.`s sent to Keener & jims442 and replied to a few others. Thanks
|
|
|
Post by familyrides1965 on Jan 6, 2013 10:36:36 GMT -5
PM sent with question. Looking for a nice radiator support cowl. No damage/rust. thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 6, 2013 13:57:49 GMT -5
PM sent with question. Looking for a nice radiator support cowl. No damage/rust. thanks replied, we`ll give it a couple days. As for the core support, nothing right now.
|
|
|
Post by oldsproject on Jan 6, 2013 22:00:39 GMT -5
If the center console falls through let me know as I'll pitch backup! Ive got a couple but always looking for better parts and upgrade.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2013 15:09:58 GMT -5
First off, I found the key for the console. Secondly, jims442, I need a response from you regarding the console. It`s either yes or no. There`s a few behind you waiting. Pretty soon everyone is going to say screw it. If I don`t hear from you soon, I`m not shy, I`ll say screw it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2013 15:13:51 GMT -5
Door panels, seen better seen worst. I did clean them up some. No idea of value? keener?
|
|
|
Post by keener on Jan 7, 2013 15:18:04 GMT -5
Door panels: they do look rough. How badly are they warped?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2013 15:37:42 GMT -5
Door panels: they do look rough. How badly are they warped? Ya, your probably right. pretty nasty! Oh well.
|
|
|
Post by jims442 on Jan 7, 2013 19:18:23 GMT -5
i was waiting for you sorry i sent you a pm asking if you would sell it without the tach if not go ahead and let some else have it sorry for the mix up i'm still interested i just don't need the tach
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2013 19:35:07 GMT -5
Last P.M. I received from you was 11/12/12.
NEXT
|
|
|
Post by jims442 on Jan 7, 2013 20:22:14 GMT -5
ok than lets start over can i buy it without tach
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2013 14:37:51 GMT -5
This is what I have. This manual transmission steering column plate is mounted to the INTERIOR side of the firewall. It`s in much better condition than it looks. I don`t know what you have if yours mounts to the engine bay side of the firewall??
|
|
|
Post by keener on Jan 9, 2013 14:49:45 GMT -5
I have the small one on the left (goes on outside of firewall). Looks like I need the one on the steering column unless the auto cars have the same plate with a cover over it on the inside firewall. Can you take al ook. My car is 35miles from here. If not covered by a plate, then I'll need the one you have. thanks
|
|
|
Post by RAM Z on Jan 9, 2013 14:55:51 GMT -5
They both go on the inside. The small boot and retainer are located between the bigger plate and the firewall. Auto cars do not have the hole for the clutch pushrod.
|
|
|
Post by keener on Jan 9, 2013 15:02:35 GMT -5
Thanks Z. Mike, I'll need the plate to allow the push rod to go through the firewall. Please PM with cost. Damn, this was an oversite when I stripped that car of the 4spd parts. Just goes to show, when you think you grabbed it all, you always miss something. I thought I removed this part b/c I pulled the steering column during the tear down. Maybe left it behind....bummer!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2013 17:54:29 GMT -5
Keener this is the correspondence I had with fastenal today, let me know
I can get it on a single pallet, commodity= car seats.
And thank you Doug for the prompt response ! I`ll be in touch.(either way)
Mike
From: Doug Troke <dtroke@fastenal.com> To: Sent: Wednesday, January 9, 2013 4:02 PM Subject: RE: Fastenal 3PL
What is the commodity? If you can get it on one pallet, we can do it for $60. Thanks, Doug
From: Doug Troke <dtroke@fastenal.com> To: Sent: Wednesday, January 9, 2013 10:05 AM Subject: Fastenal 3PL Send me the info as soon as you can.
Thanks, Doug Troke Fastenal Company 3pl Coordinator – WINO Region 507-453-8308 phone 507-494-7818 e-fax
|
|
|
Post by keener on Jan 9, 2013 19:48:32 GMT -5
PM sent
|
|