Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 6, 2009 9:49:24 GMT -5
Since BRO put the engine mod right-up on his site, i would like to re-vamp it a little and show before and after photos of the head porting and crossover stuff. i currently have no good before and after comparisons of the porting on there. i need photos of an un-touched bear bbo head (A,B,C,D,E,F,G,Ga,H (i dont want J or K)), doesn't matter which. i need good quality photos of:
-looking in an intake port (from the intake side) i need a photo of one of the outhside ports and one of two center intake ports. -looking in at the bowl (intake valve opening) showing the round valve guide boss -looking in the exhaust port (from the manifold side) one of either end port and one showing both center ports -one showing both center exhaust ports from the valve side slightly down so you can see the crossover hole and the valve guides as well as one looking in the valve hole of one of the outside exhaust ports
thanks for your input for this. i plan on pulling a couple valves out of one of my finished heads if need to for "after" photos.
hey sam-squench, dont you have a bare C casting laying around?
thanks!
|
|
|
Post by bubbasz1 on Apr 6, 2009 10:57:55 GMT -5
hey sam-squench, dont you have a bare C casting laying around? thanks! Who is sam-squench OMG, I'll see what I have in photo's, my C head is together and if worse comes to worse I can pull a few valve's but I might have some pictures while I was doing my heads, I'll look. Might not be tonight but I'll see what I can do.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 6, 2009 14:13:21 GMT -5
sasquatch, sam-squench, same difference to me... haha thanks. dont waste your time pulling valves, i can find some somewhere else if need be. and no hurry... whenever you geta chance. thanks man.
|
|
|
Post by RAM Z on Apr 6, 2009 14:25:12 GMT -5
hey sam-squench, dont you have a bare C casting laying around? thanks! Who is sam-squench OMG, I'll see what I have in photo's, my C head is together and if worse comes to worse I can pull a few valve's but I might have some pictures while I was doing my heads, I'll look. Might not be tonight but I'll see what I can do. What about the A heads under the bench? Did you forget about those?
|
|
|
Post by 1965f85 on Apr 6, 2009 15:17:34 GMT -5
|
|
|
Post by bubbasz1 on Apr 6, 2009 18:28:52 GMT -5
Hell. oldspeed, ask Ted to take a couple of pictures, I have a personal message to you with some pictures but nothing that is as clean as Teds.
|
|
|
Post by 1965f85 on Apr 6, 2009 19:18:29 GMT -5
I just put a few more photos of those Heads. www.tedstevens.us/C_HEADS.htmlFeel free to copy out the photos for your use. If you have trouble, let me know, I'll send the photos direct. Ted
|
|