|
Post by bassinguy on Nov 5, 2023 13:29:25 GMT -5
Would you send or post pics for battery hold down ? Thanks Bassinguy
|
|
|
Post by bassinguy on Dec 24, 2021 11:22:23 GMT -5
Merry Christmas and a Happy New Year. Outside of St. Louis Mo. it will be close to 70 degrees , If I get a chance I will take the 65 out to see if I can find Santa ,or better yet Mrs. Santa. Bassinguy
|
|
|
Shocks
Dec 9, 2021 13:53:37 GMT -5
Post by bassinguy on Dec 9, 2021 13:53:37 GMT -5
You can buy them direct from QA1. I went through Summit Racing.QA1 will try to sell them in a suspension package,however I pieced the parts separately and got them from Summit Racing at a lower price than the kit from QA1
|
|
|
Shocks
Dec 8, 2021 20:03:26 GMT -5
Post by bassinguy on Dec 8, 2021 20:03:26 GMT -5
Jim I put QA1 adjustable coil overs on my 65 Cutlass on all 4 corners. The car used to lean to the drivers side a little and I was able to take care of that. I also had air shocks on back, but the coil overs give it a better ride . I also install the (QA1) front sway bar, and made the handleing much better. With an adjustable coil over, you can set ride height and rebound rate. Been on the car for 6 months and really like them. A little pricey ,but did what I wanted for ride height and suspension. I am running a 17x7 on front and 17x8 on rear. Bassinguy
|
|
|
Post by bassinguy on May 27, 2020 9:39:32 GMT -5
breynolds I also have a 4 speed with the 2 baffles. I belive the car is a factory 4 speed. Bassinguy
|
|
|
Post by bassinguy on May 15, 2020 18:41:19 GMT -5
Will a 1964 Cutlass tail panel fit on a 1965 Cutlass ? Are the bolt patterns the same? I know the design is different,however I like the look of the 64 tail panel and lights. Thanks Bassingyt
|
|
|
Post by bassinguy on Jan 2, 2020 11:53:04 GMT -5
Shrink Who made the 65 assembly manual? Is it millenium industries? Could you check on shipping dash and glove box kit sent to 63090?If I take both can we do a bundle price? Thanks Bassinguy
|
|
|
Post by bassinguy on Dec 24, 2019 10:53:01 GMT -5
Merry Christmas from St. Louis Mo. Bassinguy
|
|
|
Post by bassinguy on Jun 7, 2019 11:48:52 GMT -5
Big Mike Thanks I thought the mirror was original. What I am looking for is the small mounting bracket that screws to the door and is held to the mirror with the set screw at the end of mirror base. Thanks for the pic, but will not do what I am looking far. As far as I know, the mounting bracket is not made to sell by it self. Bassinguy
|
|
|
Post by bassinguy on Jun 2, 2019 16:18:31 GMT -5
P.M. sent Bassinguy
|
|
|
Post by bassinguy on Jun 2, 2019 16:12:44 GMT -5
Would you be willing to sell the mirror and mounting bracket and hardware off the drivers door? If so what price with shipping to 63090. I have a 65 Sports coupe needing the mirror and parts to mount. Thanks Bassinguy
|
|
|
Post by bassinguy on Nov 5, 2018 15:23:30 GMT -5
P.M.sent about parts
|
|
|
Post by bassinguy on Nov 2, 2018 9:43:35 GMT -5
I am looking for 2 mounting brackets and gaskets for the outside round mirrors used on the 65 cutlass. I have the mirrors ,just need brackets and gaskets. Thanks Bassinguy Believe 1963 through 1965 Cutlass mirrors are the same. Thanks.
|
|
|
Post by bassinguy on Dec 23, 2017 20:06:34 GMT -5
From a post car owner Merry Christmas and Happy New Year. Bassinguy
|
|
|
Post by bassinguy on Nov 23, 2017 10:58:23 GMT -5
Happy thanksgiving to all Olds fans out there. I plan to take my 65 Cutlass out for a run after I full fill my duty of over eating with kids and grand-kids. Bassinguy
|
|
|
Post by bassinguy on Jan 17, 2017 12:26:19 GMT -5
P.M. you about 64 trunk lid. Bassinguy
|
|
|
Post by bassinguy on Nov 19, 2016 11:59:44 GMT -5
Prayers being sent to you and your wife. Bassinguy
|
|
|
Post by bassinguy on Oct 17, 2016 12:07:31 GMT -5
Found a lock assy at local junkyard. The only Olds he had was a 1965 88. It was the same lock housing with the same stamp number. Thanks for all the help and responses.Bassinguy
|
|
|
Post by bassinguy on Oct 14, 2016 18:21:38 GMT -5
Thanks I will call on Saturday to make sure they have a complete piece with the housing
|
|
|
Post by bassinguy on Oct 14, 2016 17:23:12 GMT -5
I am looking for a complete ,working lock set for a glove box for a 1965 Cutlass. Keys would be nice, but not necessary. Pics if possible. Thanks Bassinguy
|
|