looking for some price info

Depending what your plans are, I would go with something like this before I put the stock set on, just depends how much HP your going to put to the ground. Some of the original boxed a arms were short on the insert and actually fatigued and cracked, after 65 gm fixed that.
cgi.ebay.com/ebaymotors/64-72-Boxed-A-Body-Chevelle-Lower-Control-Arms-Malibu_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem53dd117224QQitemZ360191193636QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

actually thinking about buying some unpitted california ones.I have two sets but there typical ohio stuff.

doing a correct style resto and just tryin to get an idea what there worth.

If you go to an AACA judged meet they will. I have judged at AACA events and we are required to get down and check the frame and parts. We are mainly looking for the level of restoration, not whether or not you have the correct boxed arms or not. However, if we see something that is not original or was not available at the time of purchase, then we have to deduct points. It would especially come into play if there were two vehicles in the same class being judged. If it came down to who wins 1st, 2nd, or 3rd, an aftermarket part on the chassis could mean something. Just an FYI.