|
Post by RIP OLDS on Jul 30, 2018 20:42:51 GMT -5
|
|
|
Post by looney1 on Jul 31, 2018 17:00:19 GMT -5
I used urethane, but, some people don't like em'. Claim they ride hard. I had the arms powder coated, couldn't paint em' for what it cost to powder em'. Well, they did them when they did the frame and every thing else.
|
|
|
Post by sascha on Aug 6, 2018 6:54:33 GMT -5
I used a set of the boxed lower control arms from Fusick on a 64 Cutlass. Looks nice, fits good, I just felt they may have use a little soft or thin material, since when you thighten the sway bar, you can pretty soon see the bolt leave a mark in the control arm.
I have seen, the ones from Fusick are about 220 $ the pair, the ones from inline tube go for more than 300 $ the pair. Does anybody know if there is a difference between the Fusick parts and Inline?
|
|
|
Post by RIP OLDS on Aug 6, 2018 20:13:32 GMT -5
|
|