|
Post by dads442 on Jul 3, 2018 13:30:52 GMT -5
Two questions: anyone use the aftermarket Harmonic Balancer from Summit Racing Power Bond Premium "OEM Replacement" PB1147N? says it is supposed to fit a 65 400...I know you can get the original re-built...looking for a viable alternative...just a cruiser, no racing... Also...I did a search on this site earlier for the Torque value for the balancer bolt...some say 50, some say 160, all three locations that I can find in my 65 CSM say 50...chart at the end on the chapter for the engine says 50...which is it? Thanks is advance
|
|
|
Post by looney1 on Jul 3, 2018 15:31:22 GMT -5
My 1969 "Motor's Manual" says, 1961 to 1969 F-85 is 150. It also says, except F-85 100. Now for the confusing part. There's a foot note that says 1965 should be 100. But, it doesn't specify what model. As far as rebuilding one, I had Fusick do mine, but, it was a bit pricey.
|
|
|
Post by dads442 on Jul 3, 2018 23:59:26 GMT -5
Ok...thanks for the info I think???....I didn't know that Fusick had a rebuilding service...
|
|