|
Post by 65droptop on Mar 8, 2018 17:45:16 GMT -5
Hey guys...I'm in the process of upgrading all of my bulbs to LEDs. However, when I removed one of the front lenses off of the parking lamps I found it really difficult to remove the bulb and I didn't want to risk breaking it. It's tough to get my fingers in and around the bulb to twist it...and it's not like I have overly large fingers either. Do you all have a good tip on how to remove these bulbs without breaking? BTW...are they 1157s? Thanks in advance!
|
|
|
Post by Big Mike on Mar 9, 2018 9:49:50 GMT -5
The bulbs in the sockets of the turn signals and the back up lights get corroded easily. Other than using a good penetrating oil and let it sit for a bit, it’s just a push and turn. No real trick I’m aware of to get them out. I just expect them to break
|
|
|
Post by BR[] on Mar 9, 2018 13:30:48 GMT -5
If no luck, just break them and use a large screwdriver or needle nose pliers to twist them out.
Use some dielectric grease on the new ones.
|
|