|
Post by dads442 on Aug 25, 2017 14:41:10 GMT -5
this may seem like a dumb question but I will ask anyway... I have a 65 Holiday that I am putting a 455 into..."F" block...manual trans...I picked up a set of W/Z manifolds this weekend at an estate sale,these have the divided center runners,...I know they will fit the block...my question is will there be any issues with the down pipe and the frame...looks to me like when they are mounted they will point almost straight down and shouldn't have any interference issues with the frame...am I correct in assuming that...just wondering what others have experienced that have done this...
Thanks
|
|
|
Post by Big Mike on Aug 26, 2017 19:58:39 GMT -5
I've never had any issues with fitment of the down pipes, shouldn't be an issue
|
|
|
Post by dads442 on Aug 26, 2017 22:40:40 GMT -5
Was pretty sure there wouldn't be any fitment issues but always find it reassuring to hear from someone who has experience with that set up...
thanks for your response
|
|
|
Post by bil on Sept 26, 2017 21:18:08 GMT -5
I would just check the angle of the drop-big block vs small block. I had a set made for a small block and they didn't quite like up on the big block. Although being custom built that may have been the problem...
|
|