Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2015 11:36:26 GMT -5
Does any one have photos or know how to mount auto shift console and does the small mount go up front or in back any info will help Thanks
|
|
|
Post by 442scotty on Feb 18, 2015 17:20:32 GMT -5
Does any one have photos or know how to mount auto shift console and does the small mount go up front or in back any info will help Thanks I you have the carpet out and the floor panels are nice and clean you should be able to see dimples on the hump that indicate where to drill to mount the bracket and the shifter assembly. I think RAMZ has a manual on his site that shows drawings on which bracket is front etc. Look for the dimples though.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2015 19:18:49 GMT -5
Thanks ill look but there all new floor pan I hope there on it because it didn't come with a floor shift im converting it thank for the info if you see that manual on RAMZ site that shows drawings on which bracket is front and back please share it with me
|
|
|
Post by 442scotty on Feb 18, 2015 19:28:35 GMT -5
The dimples are on the tunnel for the purpose of adding the console probably and maybe they all came that way on the assembly line then the holes added as required for the build. I converted my cutlass using the dimples.
|
|
|
Post by BR[] on Feb 18, 2015 20:49:43 GMT -5
short=front tall=rear
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2015 21:34:31 GMT -5
Thanks ill look but there all new floor pan I hope there on it because it didn't come with a floor shift im converting it thank for the info i f you see that manual on RAMZ site that shows drawings on which bracket is front and back please share it with me Are you serious !!! I don`t know why Ramz & BR[] bother putting all the info they do on there sites. most don`t bother to look. Now it`s gotten to the point where it seems O.K. to ask others to look for you Go here www.ultra-high-compression.com/Or buy the manuals on eBay
|
|
|
Post by RIP OLDS on Feb 18, 2015 21:44:06 GMT -5
Check the assembly Manual - Part II, Page 1-2.7 (shows complete assembly of brackets and console).
|
|