|
Post by oldsproject on Jul 21, 2014 17:49:56 GMT -5
Who's are you guys using? I order some from OPGI and the rubbers are fine but the felts have no clips and look like they need to be glued on? Also too short. Tired of getting wrong stuff! Any suggestions where I can get what I need for a 2 door coupe. Thanks
|
|
|
Post by oldstata on Jul 21, 2014 20:47:18 GMT -5
I thought that robski used the Pontiac tempest ones on his post build could find it in his thread I will look over on the other sight and check
|
|
|
Post by RIP OLDS on Jul 24, 2014 19:36:00 GMT -5
I purchased the window felts from The Parts Place. I've purchased numerous items from them and never had any kinds of issues.
I had previously redone my whole interior, and have a lot of patience for that type of work. Installing these felts was the biggest PIA project on the whole car. First off, the thick rubber/plastic ends where the screws are located is thicker than the originals, and the window would not go up and down without rubbing, despite hrs spent trying to adjust the windows. I had to sand them down to get them to work. Then the clips did not line up correctly with the door openings. I called the parts place and after taking measurements, they realized the clips were 3/8 inch off, so they sent me a new set. The new set fit better, but what looked like a 15 minute project took nearly all weekend to get them to fit right.
|
|