Post by mongoose on Jun 5, 2014 10:26:47 GMT -5
Need the solenoid that controls oil pressure to vary the stall on the converter for a TH-400. This is not the same solenoid as in the ST300, nor is it the same as the kick-down solenoid. The part in the picture is the unit I got in a Kenne Bell kit back in the late 80's, and it is apparently a factory "service replacement" unit. The original looks similar to the kick-down solenoid, with a can containing the electrical parts off to the side of the mount, but it has a narrower mounting pad than the kick-down.
Actually, as pictured, both solenoids (switch pitch and kick-down) will come as a wired together unit. The solenoid on the left is the service replacement unit for the switch pitch.
Actually, as pictured, both solenoids (switch pitch and kick-down) will come as a wired together unit. The solenoid on the left is the service replacement unit for the switch pitch.
