|
|
Post by 442scotty on Oct 21, 2013 12:31:41 GMT -5
I am converting my 455 engine with the early 70's style water pump over to the 65 short water pump to gain room for either an fan clutch or electric fans. My car is an A/C car and it appears that the only thing I am missing for the conversion is the bracket at the back of the PS pump/Alternator and a flat pulley for the PS pump. Anyone have a bracket or pulley they want to part with or any other ideas to get around this problem. Im a little desperate so Im willing to spend some money.  |
|
|
|
Post by stan65cutlass on Oct 21, 2013 13:22:54 GMT -5
i have everything off a 66 330, if thats the same,its got more pulleys than horsepower to run it i think  |
|
|
|
Post by 442scotty on Oct 21, 2013 13:42:25 GMT -5
Wow! I have never seen a four pulley job. The PS pulley looks correct. Not sure if the rear bracket from a small block is the same as a big block. I want to attach a picture of the bracket I need but I cant make my pics smaller with my stupid windows 8...aarrrgggg
|
|
|
|
Post by stan65cutlass on Oct 21, 2013 13:52:31 GMT -5
i have some loose pulleys at home , doubt if i have any loose brackets tho
|
|
|
|
Post by 442scotty on Oct 21, 2013 13:56:40 GMT -5
Bummer. Can you pop the one off the 66? $$$  |
|
|
|
Post by stan65cutlass on Oct 21, 2013 14:07:41 GMT -5
you bet, she's right up the road
|
|
|
|
Post by 442scotty on Oct 21, 2013 14:13:01 GMT -5
I cant find your email address or I would send you a picture of the exact bracket but Im sure you know which one. It bolts onto the intake and also the head. I also need a PS reservoir cap. Name your price. Im desperate.
|
|
