|
Post by club442 on Aug 11, 2013 18:51:27 GMT -5
car is a 4 speed so i have everything for a a change over.no body parts are any good but all the convertible stuff is there and complete.let me know what you might need and ill check on condition and price.Jasen just posted pics of it in the im gonna restore it thread.tnx
|
|
|
Post by shane on Aug 12, 2013 8:11:03 GMT -5
Does it have vacume trunk release ? If it does I need the the trunk lock coupler
|
|
|
Post by 65442 on Aug 13, 2013 6:31:24 GMT -5
Where are you located? Gary
|
|
|
Post by club442 on Aug 13, 2013 15:26:05 GMT -5
Does it have vacume trunk release ? If it does I need the the trunk lock coupler car didnt have vacume trunk but i did part one out that did whats the peice look like that you need.and im in the cleveland area
|
|
|
Post by shane on Aug 13, 2013 19:55:52 GMT -5
|
|
|
Post by 65442 on Aug 14, 2013 6:59:00 GMT -5
sent you a PM
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 24, 2013 21:27:05 GMT -5
Do you have the convertible top activation switch for the dash?
|
|
|
Post by club442 on Aug 25, 2013 14:18:33 GMT -5
sorry too all those that have sent pms to me and i havent got back to them ,forgot about goin on vacation. pms sent. have a bunch of stuff to sell.complete 4 speed set up minus console.$1200 it includes pedals,zbar and linkage,4 speed throttle linkage,bellhousing,flywheel,steering column,1968 m20 wide ratio w/hurst shifter and linkage.trans has the correct 429 tailshaft w/drivers side speedo.$1200
i have two floor shift dash bezels 1 is very nice no gouges or cracks $150 other has a little wear around ignition ,most would b e hidden by the bezel but its there,also had gauges put in the grille area but nothing u would see with a good grille in it $75
1 dash pad no cracks very pliable not brittle ,was originally red but painted black at one time.a little wavy on the top edge closest to the windsheild but not bad.$250
i set of 330 exhaust manifolds that are like nos .not a pit or rust spot on them $75
big or small let me know what u need.
|
|
|
Post by club442 on Aug 25, 2013 14:20:20 GMT -5
Do you have the convertible top activation switch for the dash? i do have the switch very nice shape $60 delivered
|
|
|
Post by club442 on Aug 25, 2013 14:21:33 GMT -5
nothing on the coupler shane but i gotta have it somewhere.if i find it ill let you know
|
|
|
Post by club442 on Aug 25, 2013 14:32:43 GMT -5
car also has posi rear with boxed control arms and sway bar.hard to beleive by looking at it but very clean with little pitting.not sure of gear but if your interested ill find out for sure.cant find code on axle tube so gotta pull the cover.
|
|
|
Post by Big Mike on Aug 25, 2013 17:16:37 GMT -5
car also has posi rear with boxed control arms and sway bar.hard to beleive by looking at it but very clean with little pitting.not sure of gear but if your interested ill find out for sure.cant find code on axle tube so gotta pull the cover. PM sent.
|
|
|
Post by jims442 on Aug 26, 2013 7:16:23 GMT -5
i'm interested in rear end let me know gears price and were your at and maybe a picture thanks
|
|
|
Post by club442 on Aug 26, 2013 19:13:51 GMT -5
Didnt get a chance to pull the cover on the rear end today,will try to get to it tomorrow.just so evrybody knows ramsey called me first on the rear end so it goes jasen,mike,jim.
|
|
|
Post by john442 on Nov 4, 2013 21:50:57 GMT -5
How much for the pedals, zbar, pedal & fork linkage, bellhousing, bolts and dust cover, flywheel and shifter? Do you have the bellhousing fork and the other parts for the zbar?
What is a 4 speed throttle?
Thanks, John 914-737-3299 johnheck69@gmail.com
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 3, 2013 17:14:53 GMT -5
I need a Floor shift steering column with tilt
|
|
|
Post by club442 on Dec 5, 2013 18:10:36 GMT -5
have floor shift columns but none with tilt.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2013 18:58:34 GMT -5
How much for the floor shift column with out tilt
|
|