|
Post by Big Mike on Jul 20, 2013 20:47:06 GMT -5
Ok, I know it's summer and things are a bit slow here on the forum, but want to get some opinions.
I know here we have purists and hot rodders and everything in between. The Hurst shifter I have in my vert is shot and is a pain in the ass. I have two rebuilt shifters ready to install, one is a stock, standard, 65 shifter, the other is a Hurst shifter. What shifter would you use for a cruiser - occasional driver - 3 or 4 shows per year car?
|
|
|
Post by 64b09 on Jul 20, 2013 23:56:26 GMT -5
I would go with the Hurst, unless my car was 100% stock otherwise.
|
|
|
Post by RAM Z on Jul 21, 2013 8:14:51 GMT -5
I dont see any reason to use the stock shifter, ever. Hurst Competition Plus all the way.
|
|
|
Post by stan65cutlass on Jul 21, 2013 9:53:28 GMT -5
hurst ! factory doesnt compare
|
|
|
Post by keener on Jul 21, 2013 10:33:45 GMT -5
Hurst competition plus!!
|
|
|
Post by BR[] on Jul 22, 2013 16:01:22 GMT -5
No question about it, HURST COMPETITION PLUS. Just cut the base off of your original shifter handle, drill 2 holes, using the Hurst handle for a pattern and then bolt it to the Hurst gate. This will make a 2" shorter shifter handle (quicker throw) or you can weld an extra 2" piece to maintain the original length. Wrap a wet rag above the weld and there won't be any chrome distortion. Even if there is, its bELOW the boot. Attachment DeletedWho doesn't remember Linda Vaughn, Miss Hurst
|
|
|
Post by swede64 on Jul 26, 2013 17:06:08 GMT -5
What part # is the Hurst Competetion Plus shifter for a 64? I got a bench seat and a M20 26 spline from 71 that`s going in my Wagon. Talked to a guy at Hurst but he wasn`t much help when i checked what he recommended.
|
|
|
Post by BR[] on Jul 26, 2013 20:23:33 GMT -5
This is the one.......... hurst-shifters.com/hurst-products/Oldsmobile_2Oldsmobile 64-'65 F-85, 451 MUNCIE with & w/o Console COMPETITION/PLUS SHIFTER & KIT PACKAGE 2916516 Oldsmobile F-85 '64-'65 w & w/o Console 451 MUNCIE COMPETITION/PLUS SHIFTER 3917308 Oldsmobile F-85 64-65 w & w/o Console 451 MUNCIE COMPETITION/PLUS - INSTALL KIT (linkage & mounting plate 3733163
|
|
|
Post by swede64 on Jul 29, 2013 17:12:37 GMT -5
Thanks a lot BRO. Ordered the shifter but i need another installation kit because i got a 71 M20. They got bolts to attach the transmission linkage instead of studs which are on the pre 69 transmissions.
Jan
|
|