|
Post by yammiman on Mar 7, 2013 16:06:24 GMT -5
Search all the parts suppliers and I can't find a bellhousing dust cover that is any different than this one - however, my bellhousing dosen't have the half round area on the bottom like the cover has - not sure what brand bellhousing it is - any suggestions?
|
|
|
Post by RAM Z on Mar 7, 2013 16:40:56 GMT -5
Sounds like you have the early style smooth bottom bellhousing. 64 GTOs used it and pre-February 65 Oldsmobiles used it too. Very hard to find the flat cover that you need. However, you can buy the above piece, hammer it flat, lay it against your bellhousing, scribe it, then cut off the area thats not needed.
Thats my plan.
|
|
|
Post by yammiman on Mar 7, 2013 17:09:17 GMT -5
Interesting...that is what I thought about doing as the upper half matches...thanks for the info!
|
|
|
Post by tp on Mar 7, 2013 21:19:21 GMT -5
if i remember i bought the same 1 i had to trim it were the starter fits thru it ......
|
|