Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Feb 10, 2013 17:27:15 GMT -5
Where can I find gaskets for parking light lenses. What kind of gasket is used where the parking light housing meets the bumper, is it just 3m Dum Dum caulk. Any idea what size bulb they use. Its a stupid question but my bulb has no info at all, is it just a standard early model parking light/ turn signal bulb. Fyi I tried using the email on BROs site for rods442 gasket set but had no luck however a entire set would be ideal. Thanks for your time.
|
|
Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Feb 10, 2013 20:50:17 GMT -5
I have looked with fusick, and parts place and neither of them look to carry gaskets at least not for parking light assembly.
|
|
|
Post by Big Mike on Feb 11, 2013 8:42:05 GMT -5
Check with Glenn (a.k.a. BRO)
|
|
Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Feb 11, 2013 18:44:03 GMT -5
Check with Glenn (a.k.a. BRO) This Time I will send Bro a Email to see if he has any further info. I just used the information he had on his site, but my email was denied sending.
|
|
Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Feb 13, 2013 19:02:46 GMT -5
Well I had went to the hardware store and stumbled upon some 1/8" Thick rubber sheets. I still gotta clean them up a bit but it should do the job. Any other better Ideas im all ears.
|
|
Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Feb 15, 2013 18:01:24 GMT -5
Today I received parking lenses and back up lenses and also a set of backup lens gaskets. Label on package of gaskets states for parking and backup. That looks to be true but im no expert. One problem I do have is the original amber insert I have fits very loose in the lens Itself. Such a loose fit I may need to glue it or silicone it in? Cant really tell from the picture. Every thing was purchased through Parts Place.
|
|
|
Post by RAM Z on Feb 15, 2013 18:31:32 GMT -5
The ledge inside the new lens arent the same as the originals so the amber inserts dont fit right.
|
|
|
|
Post by mongoose on Feb 17, 2013 7:16:13 GMT -5
I opted for amber bulbs...
|
|