|
|
Post by mongoose on Mar 28, 2012 20:33:08 GMT -5
How far down the power steering box splines should the rag joint be placed? The is about an inch to an inch and a half of splices near the box, then a narrower section w/o splines, and then more splines to the end of the shaft.
|
|
|
|
Post by real57vetteguy on Mar 28, 2012 22:49:48 GMT -5
How far down the power steering box splines should the rag joint be placed? The is about an inch to an inch and a half of splices near the box, then a narrower section w/o splines, and then more splines to the end of the shaft. bolts I am sorry, but I am confused, the actual RAG joint bolts to the steering joint Are you asking about the splines on the steering arm bolting to the rag coupler? |
|
|
|
Post by 64b09 on Mar 28, 2012 23:19:04 GMT -5
The part without the splines is where the bolt goes through the clamp part of the joint to hold it on.
|
|
|
|
Post by mongoose on Mar 29, 2012 5:19:40 GMT -5
Got it... makes sense. Not sure what I did, but it slipped up the shaft on me. Wouldn't have thought the bolt could go through any other way, but maybe so.
|
|
