|
|
Post by mongoose on Feb 10, 2012 16:03:25 GMT -5
What screws were used for the fender well trim? What size, finish, color, with integrated washer or without?
I've got a whole bag of new screws... all mixed together... and I'm not sure from my "take-offs" what should be used.
The only thing the assembly manual says is use part # 588546, but there are no specs on the screws.
|
|
|
|
Post by tp on Feb 10, 2012 22:52:19 GMT -5
mongoose this is what they look like E-bay item # 370581656557 or 390390122156
|
|
|
|
Post by BR[] on Feb 11, 2012 10:18:26 GMT -5
hey TP the second number is a mirror
|
|
|
|
Post by tp on Feb 11, 2012 12:25:32 GMT -5
correct you are MR GLEN
|
|
|
|
Post by mongoose on Feb 12, 2012 7:54:51 GMT -5
Searching around for these screws, I have found them to be in Fusick's and The Parts Place's catalogs. Never noticed them before... but was never looking. Based on the pic in the ebay link tp share, they look to be the same.
The screws I had in the trim before were those interior trim screws, with the separate washers. In thinking back on it now, I seem to remember the original screws were badly rusted, and I used the trim screws to pretty things back up. I had forgotten I did that years ago.
So it looks like they're easily replaceable, and $5 for enough screws isn't bad... even if they are just zinc coated.
|
|
![BR[] Avatar](http://aliquippaoutlaws.homestead.com/Bro442_ANIM_150.gif)
