|
|
Post by 442scotty on May 29, 2011 20:25:43 GMT -5
I have new wiring thoughout the car from M & H and have their internal regulator updrade built in...The alternator light is on dim all the time...I remember way way back(30yrs) I had this issue on a previous 65 when I went to the internal regulator...dont recall how I solved it anymore...called their tech line which was no help...anyone?  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 30, 2011 9:22:58 GMT -5
I"ll check my wiring schematic when I get back to the house. From memory, the light gets 12 volts from dash power and gets ground from the diode bridge in the alternator.
|
|
|
|
Post by RAM Z on May 30, 2011 9:33:32 GMT -5
Mine stays on too. All new wiring also.
|
|
|
|
Post by BR[] on May 30, 2011 9:51:28 GMT -5
mine use to and i fixed it, just don't remember how. (don't laugh, you'll get here too)
try running a jumper from the back of the dash panel to a solid ground, for the hell of it. do you have you body ground clean and tight?
|
|
|
|
Post by 442scotty on May 30, 2011 18:17:29 GMT -5
This is too funny...is this whats to become of us?...a bunch of old f__ers who know it all but cant remember any of it....  |
|
|
|
Post by 64b09 on May 30, 2011 22:47:24 GMT -5
Not sure if this would be of any help, but here's a harness conversion to use the internal reg alt.
Maybe the harness is set up similarly?
|
|
|
|
Post by 442scotty on May 31, 2011 6:13:04 GMT -5
body ground it must have been cause I cleaned and redid my grounds...light is out...cant believe how many problems a bad ground can cause...thanks again !
|
|
![BR[] Avatar](http://aliquippaoutlaws.homestead.com/Bro442_ANIM_150.gif)
