|
Post by tp on Mar 8, 2011 20:38:46 GMT -5
well just got off the phone with John from Rocket Racing Performance(thanks Bubbaz ) and he seems to be very knowledgeable needless to say i spent alot of $$$$$$$ he sells adjustable rocker kit with no mods required to the heads and you can use your stock covers and a lunati cam ,lifters ,springs , etc........ cam adv Dur 285/300 Dur @ .050 .228/235 lift .496/496 45 deg. thats what john recommended per are conversation he said thats a little over stock cam and will run on pump gas & with 4GC we will see .
|
|
|
Post by 64b09 on Mar 9, 2011 2:30:04 GMT -5
THANKS BUBBAZ ? What he said.lol
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 9, 2011 10:23:01 GMT -5
Tp, all kidding aside, you made a great choice with rocketracing. Same lunati profile I`m running in my 425, you`ll love it. I`m sure you discussed quench and compression with John, but what compression are you shooting for? If you don`t mind a little advice, before you get that cam anywhere near your engine, check the grind angle (45 vs. 39) only takes a few minutes, saves hours of frustration. Absolutely nothing negative here about rocket or lunati, but packaging, order #`s, whatever, get mixed up. Whenever you have more than one person, and computers involved, there`s a chance. The best of luck with your build
|
|
|
Post by dolzinnig on Mar 9, 2011 16:17:59 GMT -5
What is the result if it's the wrong angle? Just curious. Will it run at all? Run like crap? Run the valves into the pistons? -grant
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 9, 2011 20:22:01 GMT -5
Short answer, run like crap.
|
|