|
Post by oldsproject on Dec 16, 2010 18:33:42 GMT -5
Was getting ready to install and tourque my heads down, had the head gasket on while oiling the bolt threads. Oil got onto the head gasket around each bolt hole. Wiped it off but concerned it won't seal now. I intend to coat it with copper VHT but not sure that will do it. Need new head gaskets or go for it? Appreciate any thoughts.
|
|
|
Post by 1965f85 on Dec 16, 2010 19:04:02 GMT -5
For the cost of replacing gaskets..... there is a lot of cost avoidance assurance.
|
|