|
Post by denis on Mar 3, 2010 4:25:35 GMT -5
HELLO guys, is this the original 65 442 CANCEL CAM,because i saw at year one a pictured like mine at the 1967-1968 models with a tilt column. ? denis
|
|
|
Post by Big Mike on Mar 3, 2010 9:03:37 GMT -5
Well the first plastic piece is the horn contact, you need to take that off to see the turn signal cam and switch. But from what I see it looks correct, hard to tell if it's the original switch and cam from 65, I doubt it greatly.
You can buy canceling cams all over, I see them on eBay all the time and I'm almost positive that you can get them at NAPA as well. the cam is the same for all A-bodies.
|
|
|
Post by bubbasz1 on Mar 3, 2010 11:32:18 GMT -5
you can get them at NAPA as well. the cam is the same for all A-bodies. Hey Denis, they have NAPA's in Germany>>>> sorry couldn't help myself Mike, Denis is our second German 442 owner.
|
|
|
Post by denis on Mar 3, 2010 18:17:34 GMT -5
|
|
|
Post by denis on Mar 3, 2010 18:21:15 GMT -5
and than go to
......Electrical
......Turn Signal Switch/Cancelling Cam/Repair Kit
thanks denis
|
|
|
Post by Big Mike on Mar 5, 2010 2:41:25 GMT -5
Well, excuse ME! I did not KNOW you were in GERMANY! Just kidding. Ok, you are talking about part # 3054N, right? It looks close, but the back side isn't visable in your picture. And of course you know yours is not a tilt column. The cam for a 65 tilt looks nothing like that, it's actually a bent roll pin. If it were me I would check Fusick's and see if they have a 65 horn contact/canceling cam. Their catalog sucks because it doesn't have pictures, just drawings, or at least it use to, I haven't seen a new catalog in a couple of years. However, give them a call, they are very helpful and will get you the right part if they carry it.
|
|