|
|
Post by mongoose on Sept 6, 2020 15:45:17 GMT -5
Does anyone know if the carpeting on the sides of the center console should be trimmed flush with the bottom edge of the console sides, or rolled around the edge and tucked underneath? Rolled seems kind of bulky.
|
|
|
|
Post by BR[] on Sept 6, 2020 20:21:35 GMT -5
fitted to the side , not rolled
|
|
|
|
Post by RIP OLDS on Sept 8, 2020 20:39:25 GMT -5
I rolled mine under for two reasons: 1) Original was that way (at least on my console). 2) Assembly manual shows it that way. Ignore the wire connectors, this was prior to when I added the plug-in connector.  |
|
|
|
Post by ghg on Sept 9, 2020 7:55:09 GMT -5
My original console was also roled over the sides
|
|
|
|
Post by BR[] on Sept 9, 2020 14:34:42 GMT -5
I've had several and they were glued on the sides and ran to the bottom, not rolled. BUT that doesn't mean they didn't have ones that were rolled. Mine doesn't have carpet at all, which personally I like better.
|
|
|
|
Post by mongoose on Oct 22, 2020 15:59:15 GMT -5
Have any pictures of that Bro?
BTW... thanks all for your feedback. I know sometimes people ask questions that members respond to, then we never hear any more from them. Want to let you guys know I appreciate you.
|
|
|
|
Post by BR[] on Oct 25, 2020 7:08:02 GMT -5
There isn't much area for carpet on the 4 speed console.  |
|
|
|
Post by mongoose on Oct 28, 2020 7:59:41 GMT -5
Looks good!
|
|
![BR[] Avatar](http://aliquippaoutlaws.homestead.com/Bro442_ANIM_150.gif)
