|
|
Post by breynolds on May 29, 2020 9:41:26 GMT -5
Is there anyone that could give me measurements for the side view mirror on a 65 cutlass. This is the manual mirror not the remote. I need dimensions for the two holes for the bracket the screws to the door. I need this for the driver and passenger side if they are different. Unfortunately somebody filled the holes in my doors and painted over them. Thanks in advance Brandon
|
|
|
|
Post by RAM Z on May 29, 2020 13:24:21 GMT -5
I have the Olds template.
|
|
|
|
Post by jmos4 on May 29, 2020 15:57:06 GMT -5
Hi,
My car had aftermarket mirrors from the dealership so mine are not be correct.
One tip, make sure the vent windows open before you drill holes, my aftermarket one's left the passenger side where it would only open 20 degrees.
Good luck,
|
|
|
|
Post by breynolds on May 29, 2020 21:57:48 GMT -5
Ram could you make me a copy?
Jmos4 thats good advice.
Thanks
|
|
|
|
Post by RAM Z on May 29, 2020 22:46:35 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2020 7:46:44 GMT -5
This is helpful for the Left Hand Side. How about the right? It was an option that you could order on the 65.
|
|
|
|
Post by island65cruiser on Dec 30, 2020 18:10:42 GMT -5
You should be able to just "mirror image" it for the other door. Good luck.
|
|
