|
Post by fromthegrave65 on Feb 2, 2019 11:02:18 GMT -5
Has anybody used the fusick core support mounts? Just making sure these are the correct ones.
And just to be sure since I can't find a detail and mine were non existent, the order from bottom to top would be
Nut Washer Frame Mount Support Washer Bolt
As in the square goes between the frame and support?
|
|
|
Post by dads442 on Feb 2, 2019 14:17:52 GMT -5
have not used Fusicks Core Support mounts....there is a installation detail on page 8 of section nine of the assembly manual on this site...go to home page, click on Ultra High Compression, scroll down to assembly manual, click on section nine and go to page 8...
|
|
|
Post by oldolds88 on Feb 2, 2019 16:08:30 GMT -5
got mine from supercars unlimited and they are bigger than the hole in the frame. plus all I got was the square mount. going to try elsewhere. not knocking supercars as the did a great job of retrieving my bolts from their supplier.
|
|
|
Post by fromthegrave65 on Feb 2, 2019 16:22:07 GMT -5
Thank you. Found the detail. For some reason I didn't find that page in my reprint assembly manual. I'll check again when I get home now that I know where it is.
I'll try the fusick mounts and report back.
|
|