Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 19, 2010 21:28:02 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 19, 2010 22:01:08 GMT -5
 I rebuilt the 66 toro 425 39 degree bank, 921 lifters.  |
|
|
|
Post by 64b09 on Sept 20, 2010 0:42:36 GMT -5
Nice!
More pics please
|
|
|
|
Post by Big Mike on Sept 20, 2010 8:17:06 GMT -5
Yes, absolutely, more pics. That car looks sweet is it original? |
|
|
|
Post by ricks65cutlass on Sept 20, 2010 10:42:28 GMT -5
Yeah man, more pics are needed. I love the painted hardtop.
Looks like a big block are the plans for motivation ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 20, 2010 22:52:54 GMT -5
Thanks, fremont built with ac from arizona. It's a repaint still original colors. I bought it last Aug with the 425. The old owner had the 330 water pump on it so he didn't have to change the radiator. I ran it hot and and popped the head gasket. I just wanted to go through the motor and clean every thing up in the engine compartment and it ended up turning into a frame off project.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 21:52:46 GMT -5
|
|
|
|
Post by keener on Sept 22, 2010 21:54:54 GMT -5
looks like the upholstery was redone at some point...I do not see the horizontal strip which is usually one-third of the way down the front and back seats. Too tired to go check the "book of knowledge". Maybe tomorrow. Looks awesome. Glad to see another '64 on the site.  |
|
|
|
Post by keener on Sept 22, 2010 21:59:39 GMT -5
did you find sheet metal nails pucnhed through the floor? My original underlament was secured this way from the Fremont plant. I found the build sheet in the springs on the underside of the passenger sheet.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 22:01:33 GMT -5
  Frame off for blsting and look at all those tiny little bubbles in the paint,, Solvent pop or moisture? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 22:08:26 GMT -5
Keener, I didnt see any nails but staples i did.. I have seen a few 64s with this style seat.. You are right, my convertable has the horizontle stripes.. It would be nice to know. Legendary interiors only sells with the stripes for this year..
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 22:12:02 GMT -5
 Look trumpets on a 64.. Thats a sin to you 65 owners isnt it? I wonder where the first owner got these? |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 22, 2010 22:23:46 GMT -5
|
|
|
|
Post by 64b09 on Sept 22, 2010 23:09:56 GMT -5
Looking good ;D
|
|
|
|
Post by keener on Sept 23, 2010 9:14:48 GMT -5
man, that is looking really nice. I got my hardtop upholstery from PUI and it has the horizontal stripes. My vert also has the stripes but it was replaced back in '89 so cannot say for sure that all have stripes. Good luck!
|
|
|
|
Post by stan65cutlass on Sept 23, 2010 10:21:56 GMT -5
nice car, nice pipes ;D
|
|
|
|
Post by pikecoolds on Sept 23, 2010 20:12:55 GMT -5
I really like the paint scheme. My buddy had a 64, Brings back memories. I think they have one of the best looking rear pot metal panels around
|
|
|
|
Post by stan65cutlass on Sept 23, 2010 20:18:50 GMT -5
that is an attractive rear panel, anyone ever adapt one to a 65 i wonder
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2011 10:46:54 GMT -5
|
|
|
|
Post by keener on Jan 12, 2011 13:06:14 GMT -5
I need some parts. Are you willing to sell anything off this car?
|
|
