|
Post by chubbie on Mar 6, 2018 7:25:04 GMT -5
I have a 350 olds with the low compression pistons and would like to use #2 330 heads to raise the CR. It looks like with the low dish pistons and the #8 heads i have 7.26 CR? I would like to be in the 9 to 9.5 CR. How much do i need to mill the #2 heads? will i have trouble with the push rods and the 330 heads on a 350? pistons are sealed power 332NP 22CC dish? .037 deck height fel pro headgaskets .040 #2 330 head 60CC Any help would be appreciated
|
|
|
Post by sascha on Mar 7, 2018 1:51:01 GMT -5
Take the block down to zero deck and then all you have left is the .040 of the felpro gasket.
If you still want to go higher you can start milling heads, that` s what I do
Sascha
|
|