|
Post by mongoose on Jul 13, 2017 13:31:47 GMT -5
I've misplaced my service manual CD, and my Assembly manual copy is missing (it was skipped when the copies were made) page section 12.1, which likely shows the fuse panel. Does someone have one they can post. Or... there is a 3A fuse, mounted vertically, near the top of the fuse panel. What does that fuse supply voltage to?
|
|
|
Post by dads442 on Jul 13, 2017 14:02:52 GMT -5
I believe that fuse is for the dash lights...on the home page for this site just above where it says forums, click on Ultra High Compression and scroll down to assembly manual then go to section 5 or 6, i think it it 5 but anyway the first item in that section will be the fuse panel...
|
|
|
Post by mongoose on Jul 13, 2017 15:34:31 GMT -5
Thanks! I figured it was somewhere... Jason and Bro have just about everything out on their sites.
|
|
|
Post by mongoose on Jul 13, 2017 15:40:33 GMT -5
While on the subject of fuse panels, does anyone know what is a reasonable, to be expected, voltage drop on the positive side between the battery and the fuse panel? I'm also noticing different voltage/voltage drops between different terminals on the panel. Normal, or do I have some corrosion here and there? Logically I'd say they'd all be the same, but where I'm seeing most of the differences is between the switched terminals, and the un-switched terminals (with the un-switched terminals being about 0.3 volts lower than the switched terminals (again not what I'd expect).
|
|