65 hood and glass storage

I normally take two 2X4's (length of hood) and space them a 3-4 inches apart. I run two shorter ones about 4-5" from the ends to join everything together from the bottom. Then I fill in the void with good quality foam, bubble wrap, or other cushioning material. Then I slide the back edges of the hood into the void and stand mine up on the rear edges. I then run a rope around the top and secure to a wall of some sort. If you will keeping outside over ground then I usually double up the bottom 2X4s and put a piece of good quality tarp on the ground to keep moisture down. I've also layed hood flat across rafters, saw horses, and/or a bench. Although I haven't tried this yet one option I have considered is making a bracket and mounting to the hinge area and then securing to a wall. I'm sure many ways to put away for safe storage.