|
Post by kjr442 on Jan 29, 2017 18:16:34 GMT -5
I have two 1965 442 quarter panels available, these are both very straight, with very little rust. I can cut these beyond the factory spot welds.850.00 each plus shipping. I have two sets of rust free hard top doors.250.00 each, plus shipping. Email, or text me and I will send you pictures. I am located in North Texas. 469 855 7166 Kevin kr51063@yahoo.com
I have other 1965 parts available, just send me your request,
|
|
|
Post by Big Mike on Jan 30, 2017 8:16:53 GMT -5
I should be getting a job running out to San Diego next week. If all goes well I will be returning to VA after 2/15 or so. I could stop in TX and bring any parts to the east coast if it works for anyone.
|
|
|
Post by boba65442 on Feb 1, 2017 23:48:39 GMT -5
PM sent interested in a drivers side quarter panel
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2017 10:37:36 GMT -5
I have two 1965 442 quarter panels available, these are both very straight, with very little rust. I can cut these beyond the factory spot welds.850.00 each plus shipping. I have two sets of rust free hard top doors.250.00 each, plus shipping. Email, or text me and I will send you pictures. I am located in North Texas. 469 855 7166 Kevin kr51063@yahoo.com I have other 1965 parts available, just send me your request,
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2017 10:39:53 GMT -5
I am looking to restore a 1965 442 Convertible and I need a frame. I seem to be able to find them for hardtops but not the Convertible...any help would be appreciated!!
|
|
|
Post by kjr442 on Feb 10, 2017 11:19:42 GMT -5
I am looking to restore a 1965 442 Convertible and I need a frame. I seem to be able to find them for hardtops but not the Convertible...any help would be appreciated!! Sorry, no convertible frames on hand. I might have a source for you though. I will get back to you.
|
|
|
Post by kjr442 on Mar 1, 2017 21:20:10 GMT -5
I am looking to restore a 1965 442 Convertible and I need a frame. I seem to be able to find them for hardtops but not the Convertible...any help would be appreciated!! Sorry, no convertible frames on hand. I might have a source for you though. I will get back to you. Contact info sent to you by pm.
|
|
|
Post by john442 on Mar 14, 2017 19:39:03 GMT -5
I'm looking for two stainless trim pieces for the rear interior vinyl panels for my 65 Cutlass Holiday. These panels are the ones with the window crank in them. There are two stainless pieces on each. This one on top is the wider piece and the one on the lower bottom is the thinner piece. I need the thinner piece for each panel (L&R). Would you have them and if you do how much and what condition?
Thanks, JOhn
|
|
streetrod
Member
Life to short to go slow.
Posts: 107
|
Post by streetrod on Mar 29, 2017 21:46:35 GMT -5
Looking for bumpers I need them straight and dent free rust or bad chrome ok
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 27, 2017 1:06:57 GMT -5
Hi I'm looking for a clean passenger door for a 65 convertible Vic 631 455-7018 Long Island NY, maybe a hood also thanks
|
|
|
Post by boba65442 on Oct 28, 2017 22:35:02 GMT -5
Vic,
Maybe I can help. I have a few doors and I'm on LI. I'll call you Monday or call me.
Bob 516 641 6464
|
|
|
Post by kjr442 on Oct 30, 2017 19:21:19 GMT -5
I do have the door you need 469 855 7166
|
|
|
Post by vmxfreakbrother on Jan 26, 2018 0:32:16 GMT -5
Do you have a right rear 1/4 window regulator?
|
|
|
Post by RAM Z on Jan 26, 2018 12:23:11 GMT -5
Do you have a right rear 1/4 window regulator? For a post car or a hardtop?
|
|
|
Post by vmxfreakbrother on Jan 28, 2018 0:13:02 GMT -5
Convertible. I would assume its the same as a hard top.
|
|
|
Post by kjr442 on Jul 6, 2018 11:56:40 GMT -5
Convertible. I would assume its the same as a hard top. I have a setup for a hard top
|
|
|
Post by john442 on Jul 8, 2018 19:24:14 GMT -5
Would you have a set of backup lights? I'm asking for Tom a friend who asked this site several months ago.
John
|
|
|
Post by kjr442 on Jul 8, 2018 23:07:23 GMT -5
I do, but they will have some pitting. 125.00 for the pair plus shipping.
|
|
|
Post by john442 on Jul 9, 2018 19:53:48 GMT -5
Is it possible to email me some pics and I will see that Tom gets them. I don't think he is looking for anything better than driver quality. If he wants them either he or I will let you know.
My email is: johnheck69@gmail.com
Thanks for your help,
John 386-492-4875
|
|
|
Post by kjr442 on Jul 16, 2018 14:08:15 GMT -5
Is it possible to email me some pics and I will see that Tom gets them. I don't think he is looking for anything better than driver quality. If he wants them either he or I will let you know. My email is: johnheck69@gmail.com Thanks for your help, John 386-492-4875 will do. thank you.
|
|