Xtremejr
Member
Hold my beer and watch this shit.
Posts: 493
|
Post by Xtremejr on Nov 6, 2015 19:20:02 GMT -5
Im curious what you fellas are running for aftermarket headers and exhaust. Im talking bolt up headers and maybe 2.5" flowmaster 44 series. I want noise but also power and torque. I think i lost 30-40 hp hooking up 2in. Thank you.
|
|
|
Post by 64b09 on Nov 6, 2015 19:54:27 GMT -5
I'm running Hedman 58150's and a 3" Pypes Xpipe system with Hooker Maximum flo mufflers. For the headers I had to trim a bit of one of the lower control arm mounts, which I'm guessing you wouldn't want to do with a 442. Didn't bother me with a cutlass.
|
|
|
Post by 64b09 on Nov 6, 2015 19:58:27 GMT -5
I'm only running the 3" because I traded a G body system with a friend for the Abody one.
|
|
|
Post by wailinwayne on Nov 7, 2015 10:09:06 GMT -5
I'm running 3" aluminized exhaust off ceramic coated headers followed by flowmaster mufflers. The sound definitely does not go unnoticed and it's about the least restrictive system that you can run legally.
|
|
|
Post by wailinwayne on Nov 8, 2015 8:46:41 GMT -5
|
|