|
4 speed
Dec 18, 2014 19:51:42 GMT -5
Post by oldolds88 on Dec 18, 2014 19:51:42 GMT -5
im converting my 65 from an automatic to a 4 speed, does any one have a measurement for the hole in the floor?it's going in a bucket seat no console car. even something simplelike measue from the front floor seam back and from the rocker across will probly work.i dont want a big gaping,mis cut,hacked up floor,i just cut one out that had holes. thank you
|
|
|
4 speed
Dec 19, 2014 18:07:46 GMT -5
Post by rag on Dec 19, 2014 18:07:46 GMT -5
Don't have the measurements but here's some photos of my non-console factory 4 speed. If you're using a Hurst shifter it hits the back of the opening so adjust accordingly.
|
|
|
4 speed
Dec 19, 2014 20:49:31 GMT -5
Post by oldolds88 on Dec 19, 2014 20:49:31 GMT -5
thank you, i think this will help. is that a factory cover over an over sized hole?
|
|
|
4 speed
Dec 19, 2014 23:27:12 GMT -5
Post by BR[] on Dec 19, 2014 23:27:12 GMT -5
Console Car
|
|