Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 5, 2012 18:25:07 GMT -5
Guys I need to locate a source to order new rubber seals that are on the inside of the rear fender extensions. They end up in between the rear extension and the rear qtr, panel. Fusick's cat does not show them listed.
|
|
|
Post by 1965f85 on Nov 5, 2012 19:59:45 GMT -5
Odered mine from OPGI
|
|
|
Post by BR[] on Nov 5, 2012 20:36:35 GMT -5
do you have a part number? I can't seem to find them.
|
|
|
Post by mongoose on Nov 5, 2012 20:44:47 GMT -5
I figured they wouldn't be available. I used 3M rope caulking.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 5, 2012 20:53:30 GMT -5
I cannot locate anywhere, been online looking since the new post. Thanks
|
|
|
Post by 1965f85 on Nov 5, 2012 22:12:37 GMT -5
|
|
|
Post by mongoose on Nov 6, 2012 6:18:51 GMT -5
I seem to remember the dried up pieces that I had were molded in an "L" shape instead of the "U" shape indicated in that picture. That doesn't mean that what's pictured wouldn't work just fine as is, or maybe it could be tweaked by trimming a portion of it so it would work.
|
|
|
Post by BR[] on Nov 6, 2012 7:32:28 GMT -5
I think the strip calking works just fine. I've never seen them available, but would like to let everyone know, if they are.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 6, 2012 8:57:38 GMT -5
I have the 3M strip caulking, and that's what I will use. Doesn't hurt to ask.
|
|
|
Post by mongoose on Nov 6, 2012 9:55:03 GMT -5
Yeah I used the strip calk for the extensions and everywhere the moldings penetrate the body. Of course the car hasn't been in the rain, nor have I even washed it yet! So I don't know whether I did a good enough job sealing it or not. ;D
|
|
|
Post by oldstata on Aug 26, 2014 20:39:37 GMT -5
Did you guys paint these on the car or off just wondering if the seal should be painted
|
|
|
Post by oldolds88 on Aug 26, 2014 23:06:57 GMT -5
the extensions were installed after paint at fisher body.
|
|
|
Post by mongoose on Aug 27, 2014 4:54:42 GMT -5
My extensions were off the car when painted.
|
|
|
Post by BR[] on Aug 27, 2014 11:32:48 GMT -5
This is what some I have look like............
|
|
|
Post by oldstata on Aug 27, 2014 11:58:58 GMT -5
Bro, this is what mine had does it take both of these gaskets or is this gasket wrong ?
|
|
|
Post by stan65cutlass on Aug 27, 2014 12:17:31 GMT -5
that looks like mine as well
|
|
|
Post by BR[] on Aug 27, 2014 12:51:05 GMT -5
I have some with those too..........., but I also got the ones above from what appeared to be an unmolested quarter panel.... There always seem to be variables.....I don't understand the location of the notches?
|
|
|
Post by oldstata on Aug 27, 2014 12:51:40 GMT -5
Now that's funny
Thinking of tail lights do they repop that gasket or just use the 3m Dumb dumb as well
|
|
|
Post by BR[] on Aug 27, 2014 13:01:12 GMT -5
I've always used the 3M Strip Calk
|
|
|
Post by RAM Z on Aug 27, 2014 14:42:13 GMT -5
Bro, this is what mine had does it take both of these gaskets or is this gasket wrong ? All the ones Ive seen look like that.
|
|