Post by RAM Z on Oct 15, 2012 15:29:27 GMT -5
Bought the Guide switch, with removable bearing, from NPD. Chevelle part that crossed with Cutlass. Repro piece doesnt have the locator teeth that locate it in the tube. Never would line up with the signal lever hole or sit flush in the tube. So every time I tightened it down it made the upper collar cockeyed.
Took it apart a bunch of times and never could get it right. Ended up with an NOS one from eBay.
Took it apart a bunch of times and never could get it right. Ended up with an NOS one from eBay.
